T-soonte vaheline kaugus
(standard 100 mm)
Teras S355J2+N plasma-nitreeritud
Lisainfo >Täiendavad pilud tagavad pideva lineaarse kinnitusasendi kogu laual.
Lisainfo >Slot bushing for fastening accessories
Lisainfo >
System 28
T-Slot Table with cross slots
T-soonte vaheline kaugus
(standard 100 mm)
Tarvikute kinnitusavad Ø 28 mm
Puuravad 100x100 mm Grid
Teras S355J2+N,
plasma nitreeritud + BAR pinnakate
Saadaval laua suurused:
1000x1000x200 mm
1200x800x200 mm
1200x1200x200 mm
1500x1000x200 mm
1500x1500x200 mm
2000x1000x200 mm
2000x1200x200 mm
2000x2000x200 mm
2400x1200x200 mm
3000x1500x200 mm
4000x2000x200 mm
System 28
T-Slot Table with transverse slots
T-soonte vaheline kaugus
(standard 100 mm)
Tarvikute kinnitusavad Ø 28 mm
Puuravad 100x100 mm Grid
Teras S355J2+N,
plasma nitreeritud + BAR pinnakate
Saadaval laua suurused:
1000x1000x200 mm
1200x800x200 mm
1200x1200x200 mm
1500x1000x200 mm
1500x1500x200 mm
2000x1000x200 mm
2000x1200x200 mm
2000x2000x200 mm
2400x1200x200 mm
3000x1500x200 mm
4000x2000x200 mm
System 28
T-Slot Table with lengthways slots
T-soonte vaheline kaugus
(standard 100 mm)
Tarvikute kinnitusavad Ø 28 mm
Puuravad 100x100 mm Grid
Teras S355J2+N,
plasma nitreeritud + BAR pinnakate
Saadaval laua suurused:
1200x800x200 mm
1500x1000x200 mm
2000x1000x200 mm
2000x1200x200 mm
2400x1200x200 mm
3000x1500x200 mm
4000x2000x200 mm
approx. 35 – 39 mm / 24,5 – 27 mm
200 mm kõrge
T-Slot Table includes special accessories like thread bolts, threaded sleeves and t-nuts. Naturally all other System 28 Siegmund accessories can be used.
Bearing load per leg 2,000 kg.
Maximum recommended static bearing load:
with 4 legs = 4,000 kg
with 6 legs = 6,000 kg
with 8 legs = 8,000 kg
based on even load distribution.
(Data only for leg standard equipment)
Mathematically resulting in substantially higher overall loads. However, the indicated bearing loads were calculated with reserves for safety reasons.
Please consult with manufacturer if higher overall loads are required.